Type 1541-3, 1543-3 Safety Valve

Two-adjusting-ring design of the Consolidated Type 1541 and 1543 safety valves allows for sharp opening action and full lift at three percent overpressure. The self-aligning spring washers help increase repeatability and the valve’s life span.

Features:

Suitable for steam and other compressible fluid applications. the Consolidated Type 1541 and 1543 safety valves are ASME Section I and VIII approved. They are most commonly used in pharmaceutical, dying and process plants.

Applications:

The Consolidated Type 1541 and 1543 safety valves are configured for steam and other compressible fluids. Compression media is limited to non-toxic, non-flammable, non-corrosive service. They are most commonly used in pharmaceutical and process plants.

Specifics:

Inlet Sizes: 0.5″ through 2.5″
Outlet Sizes: 0.75″ through 2.5″
Inlet Rating: Threaded
Outlet Rating: Threaded
Orifice Sizes: D, E, F, G, H and J
Set Pressure Range: 15 to 350 psig (1 to 24,13 barg)
Temperature Range: -20°F to 420°F (-29°C to 215°C)
Materials: Cast iron bonnet with brass base and trim
Certifications: ASME B&PVC Section I and VIII